Uwatec G2TEK, Руководство пользователя

Страница: 23 / 92

23
English
GALILEO 2 TEK (G2TEK) USER MANUAL
2 .2 .2 Dive mode
Your G2TEK allows you to choose between
Scuba, Gauge and Apnea modes.
When the G2TEK has not been submerged
for a while the display appears as shown
below:
F
NOTE: Since Gauge and Apnea
modes do not track tissue saturation,
a 48-hour locking interval occurs
between the time the last dive is
made in Gauge or Apnea mode and
a change to Scuba mode is possible.
Conversely, the G2TEK shown below
has been dived in Scuba mode and
cannot be changed to Gauge or
Apnea mode until the desaturation
time has elapsed.
If you decide to change modes before
the 48-hour interval ends, or before full
desaturation occurs, you will have to go
to the desaturation reset menu and make
a manual desaturation reset. Refer to
chapter
Desaturation reset to learn how
to manually reset the desaturation.
F
NOTE: Apnea mode is only available
as a selectable dive mode if you have
enabled it in the G2TEK’s
8.7 Feature
upgrade menu. By default Apnea
mode is disabled and the menu 2.2
Dive mode will appear as 2.2 Gauge
mode .
2 .2 .3 Safety stop timer
Safety stop timer duration and start mode
can be edited in this menu.
See chapter: Safety stop timer to learn
how this feature is used while diving.
2 .2 .4 ppO
2
max
The ppO
2
max setting defines the maximum
limit for oxygen partial pressure. Gas O
2
settings higher than this limit cannot be
selected for any tank.
2 .2 .5 Water type
The G2TEK measures pressure and
converts it to a depth value by using water
density as a constant. A depth of 10m/33ft
in salt water corresponds approximately to
10.3m/34ft of depth in fresh water.