Uwatec G2TEK, Руководство пользователя

Страница: 11 / 92

11
English
GALILEO 2 TEK (G2TEK) USER MANUAL
temperature and wireless sensors.
Decompression calculations are
performed in this mode.
1 .4 Switching on the G2TEK
To switch on the G2TEK, press the right
button.
F
NOTE: You cannot turn the G2TEK on
when it is connected to USB.
The initial activation of your G2TEK will
require some basic set up (selecting
language, setting the time, etc.). The
G2TEK will guide you through them. Simply
follow the screen prompts while using the
buttons.
F
NOTE: The following basic setup
will also be required if you reset the
G2TEK with the menu
8.6. Factory
settings .
Press the right button.
Select your language with the left or middle
button. Then confirm your selection with a
press of the right button.
Select each unit with the left or middle
button, and confirm it with the right button.
Set the time zone with the left or middle
button and confirm it with the right button.
After this initial setup, your G2TEK will boot
to the so-called main
time-of-day display.
This is the display in which the current time
is shown in the main field.