UV Superstore LEOPARD UV Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 10 / 48

ϰ
c) Electronic Control Center (ECC)—
for Polycarbonate Enclosures
The ECC is designed to be remote mounted within 4-6 feet of the chamber. Prior to final placement, ensure
that the supplied cable lengths (8 ft.) are adequate to reach between the ECC and the chamber.
The ECC requires clean power. Information on voltage and cycle is found on the wiring diagram located in
the back of this manual. Equipment should be kept off lines where there are surges or brownouts. Always
disconnect power before servicing the system.
The ECC will contain the ballasts and other electrical controls. For models equipped with the standard UV
Meter Board Monitor option and/or standard High Heat option, the ECC will display operation status such as
individual Lamp Indicator, Elapsed Runtime Meter (ERTM), optional UV Monitor Intensity, optional Low UV
Indicator, and optional High Heat indicator.
For models equipped with the optional Standard UV Meter Board Monitor, the ECC displays operation
status such as individual Lamp Indicator, Elapsed Runtime Meter (ERTM) , lamp runtime hours and relative
UV lamp intensity. For models equipped with the WatchDog Monitoring System, the ECC will display
operation status such as individual Lamp Indicator, and is capable of monitoring total runtime hours, lamp
runtime hours, lamp intensity, relative UV percentage, temperature and in some models, real-time dosage.
The ECC is equipped with a manual on/off switch for standard models. The optional HOA (Hands Off Auto)
switch enables you to remotely power on/off your UV system.
hsDĞƚĞƌŽĂƌĚDŽŶŝƚŽƌ
KƉƟŽŶ
ůĂƉƐĞĚ
ZƵŶdŝŵĞ
DĞƚĞƌ
KŶͬKī
^ǁŝƚĐŚ
>Žǁhs
/ŶĚŝĐĂƚŽƌ
>ĂŵƉ
^ƚĂƚƵƐ
/ŶĚŝĐĂƚŽƌ
ŝƐƉůĂLJWůĂƚĞĨŽƌ
^ƚĂŶĚĂƌĚhsDŽŶŝƚŽƌŝŶŐ
^LJƐƚĞŵ
KƉƟŽŶ
ŝƐƉůĂLJWůĂƚĞĨŽƌ
tĂƚĐŚŽŐDŽŶŝƚŽƌŝŶŐ
^LJƐƚĞŵ
KƉƟŽŶ
ŝƐƉůĂLJWůĂƚĞĨŽƌ
tĂƚĐŚŽŐDŽŶŝƚŽƌŝŶŐ
^LJƐƚĞŵ
KƉƟŽŶ
WŚŽƚŽƐŚŽǁŶŝƐŝƐƉůĂLJWůĂƚĞĨŽƌƚŚĞ
^ƚĂŶĚĂƌĚhsDĞƚĞƌŽĂƌĚDŽŶŝƚŽƌKƉƟŽŶ
ĂŶĚ^ƚĂŶĚĂƌĚ,ŝŐŚ,ĞĂƚKƉƟŽŶ