UTC UDI-14 Скачать руководство пользователя страница 8

Страница: 8 / 58

Introduction

Congratulations on your purchase of the UTC

–

Underwater Digital Interface 14 (UDI-14

™

) System.

UDI-

14™ is a device that contains several functions used for diver safety, communication and

computation.

To active your warranty and allow us to update your UDI-

14™ software from time to time, please visit our

web site

www.utc-digital.com

and fill the online registration card.

The system consists of the UDI-

14™ diving unit, an optional UDI

14™ boat

station (version II), and the

DiveSim

™

software. Each item can be purchase separately.

The UDI-

14™ con

tains the following functions:

•

Text messages communication device

•

SOS signal transmission and reception

•

Navigation unit and homing device

•

Dive computer (on the dive unit only)

•

Compass

The DiveSim

™

PC software can be used in conjunction with the UDI-

14™ to plan dives, review dive data,

and simulate dives. The software can also be used to update text message and names (users) lists. The

DiveSim

™

is used also to manage dive log files.

The UDI-

14™

text messaging system links divers through transmission of pre-set messages with ease and

reliability at ranges of up to 500 meters, depending on environmental conditions.

Upon receiving a message signal, the UDI-

14™ unit sounds an audible alert and lig

hts up to show the

message.

The SOS signal can be activated by a diver in distress, or remotely by any diver who suspects that his
buddy is in distress. Upon activation of an SOS signal, the UDI-

14™ transmits information required to

locate the SOS sender.

Each UDI-

14™ includes a homing device to help the diver locate other divers or the

boat unit.

The UDI-

14™ can be worn on the lower arm or attached to the Buoyancy Compensator (BC).

The UDI-

14™ permits a diver to communicate with any other diver

in the network without distractions or

potential discomforts.

Содержание UDI-14



























































Результаты поиска

Содержание UDI-14

Отзывы:

Похожие инструкции для UDI-14

Бренды по названию

Популярные бренды

UTC UDI-14, Руководство пользователя

Результаты поиска

Содержание UDI-14

Отзывы:

Похожие инструкции для UDI-14

Бренды по названию

Популярные бренды