25
Contrast
Use this option to select a contrast level for the display. .
The contrast interval ranges from 1 (very little contrast) to 7 (high contrast).
Use the
Up
/
Down
buttons to
define a contrast value and press
Enter
. Make sure there are no
strips seen on the screen.
CONTRAST
Cont r ast : 7
Units
Use this option to select Metric units (meters, degrees C) or Imperial units (Feet, degrees F) as your unit
of measurement.
Select Imperial or Metric
and press
Enter
. All units displayed on the
UDI-
14™ will now conform to the
unit type chosen.
UNITS
1. Imperial
2. Metric
NOTE
: The temperature displays according to your units selection
–
When you select Feet, Fahrenheit
degrees are shown, when you select Meters, centigrade degrees are shown.
About UDI-
14™
Use this option to view the UDI-
14™
serial number, and software version installed. Use this information
when contacting UTC about your UDI-
14™.
In addition the
About UDI
screen presents the table tag value, which is a unique code for each specific
UDI-
14™ list of users and messages. Make su
re that every UDI-
14™ device and boat unit (in the same
network) has the same Table Tag value. For more information see page 5.
ABOUT UDI
19:36 08/08/2013
S/N: 20-111007
Version:
UDI-A006-022
Table tag
0A45FC
Revert to factory settings:
In case you would like to revert to the original UDI-
14™ factory settings, press the
Up
,
Down
and
Enter
buttons simultaneously to start the UDI-
14™ on.
Wait for the UDI-
14™ to turn on and for the message
“set default” appears on the screen.
All customizations and settings you have done will be erased, and
UDI-
14™ will turn on with
the original factory settings.
