INTRODUCTION
This manual contains information for the UNIFLAME Flame Detector / Amplifier, provided by Forney
Corporation, 3405 Wiley Post Road, Carrollton, Texas.
All personnel should become thoroughly familiar with the contents of this manual before attempting to
operate or maintain the system. Because it is virtually impossible to cover every situation that might occur
during operation and maintenance of the equipment described in this publication, personnel are expected
to use good engineering judgement when confronted with situations that are not specifically mentioned
herein.
The user should review this manual whenever significant changes are made to the system. To be of value,
the manual must always reflect the latest configuration of the equipment. It should be noted, however,
that Forney Corporation will furnish updated pages only if a modification is authorized by Forney and
accomplished under Forney supervision.
PROPRIETARY NOTICE
The contents of this publication are proprietary data of Forney Corporation. Reproduction or use of any
part of the publication for purposes other than the support of the equipment for which it is published is
permissible only if expressly authorized in writing by Forney.
The original source of this publication is Forney Corporation. Forney Corporation can not accept
responsibility for the accuracy of any modifications made to this document subsequent to its issuance,
except in the case where such modifications were made with the express written approval of Forney
Corporation. All subsequent users of this publication should contact Forney Corporation to confirm the
original contents of this publication.
Additional copies of this publication may be obtained from Forney. When ordering or requesting cost
information, refer to the publication number appearing on the title page. Address to the attention of the
Sales Department, Forney Corporation, 3405 Wiley Post Road, Carrollton, Texas 75006-5185.
ii
