Forney Corporation
UNIFLAME User’s Manual
Publication 372000-48 Rev H
SECTION 5 PROGRAMMING UNIFLAME DETECTORS
5.1 KEYPAD/DISPLAY
Figure 14 – Keypad/Display
The UNIFLAME Series detectors use an eight (8) character alphanumeric LED display and four (4) push
buttons (Figure 14) to review and program various setpoints and operating parameters. The functions of
the push buttons are:
Up
Down keys
▲▼
Use UP and DOWN keys to scroll through the
detector’s menus. When in the EDIT mode use the
UP and DOWN keys to change the selected setpoint.
Select key
When in the EDIT mode, press the SELECT key to
display the stored value of the setpoint. Use the
UP/DOWN keys to change the value.
Press the SELECT key a second time, although a
setpoint has been changed, to return to the menu
without saving the setpoint (except for parameters
described in Section 5.2.2)
Program key
The PROGRAM key saves a change made to a
setpoint. Use the PROGRAM key to execute the
AUTOTUNE mode.
14
