Utax CLP 3526, Инструкция по эксплуатации

Страница: 84 / 156

3.9 Operating the Storage Device
3-44
8 88 8
Check that the message display has changed to
Waiting, then press the
GO key. This writes the file to
the memory card and instructs the printer to
automatically print out a memory card write
information page as shown below.
The file is written onto the memory card given a
destination name (also referred to as a partition name)
which the printer automatically assigns one after
another as follows: DataS001 (first data), DataS002
(second data), DataS003 (third data)...
Figure 3-12
When the memory card write information page is
printed, the display returns to
Ready
.
9 99 9
Repeat above steps until you have transferred all data
(files) that you want to write to the memory card.
Each time you finish writing data, a memory card
write information page is printed from the printer
showing the information, but pertaining only to the
data just written. To see all data contained in the
memory card at once, print a list of data names as
explained. See
Printing a list of data names
(Partitions) on page 3-45 .
Deleting data
It is possible to use the printer to delete data from a memory
card one by one.
To delete data from a memory card, proceed as follows.
Check that the memory card contains data. Otherwise, the
>Delete Data menu will not appear on the message
display.
1 11 1
Press the MENU key.
2 22 2
Press the
U
or
V
key repeatedly until
Memory
Card >
appears.
3
33
3
Press the
Z
key.
4
44
4
Press the U or V key repeatedly until
>Delete
Data
appears. The data name also appears (
Report
,
in this example).
5 55 5
Press the ENTER key. A blinking question mark (
?
)
appears before the data name.
6
66
6
Press the
U
or
V
key to display the desired data
name.
7
77
7
Press the
ENTER
key. Processing appears and
the data is deleted from the memory card. The display
returns to
Ready
.
Partition Type:
Type of data written (currently only
type 2 is supported).
Partition Name:
The destination name of data writ-
ten to the card.
Write Partition Length: The size of the written data on the
memory card.
Others: Error information.
WRITE INFORMATION
Memory Card >
>Delete Data
Report
>Delete Data
?Report