Utax CLP 3526, Инструкция по эксплуатации

Страница: 38 / 156

2.4 Special Paper
2-10
When the label paper has extra margin around the label’s
outside edges that correspond to the margins of the printable
area, do not remove the extra top sheet from the carrier sheet
until printing is finished.
Figure 2-12
When selecting labels, make sure to use only those meeting
the following requirements:
Postcards
Fan the stack of postcards and align the edges before loading
them in the MP tray. Make sure the postcards you are going
to set are not curled. Feeding curled postcards may cause
paper jams.
Figure 2-13
Some postcards have rough edges on the back (those are
created when the paper is cut). In this case, put the postcards
on a flat place and rub the edges with, for example, a ruler to
smooth them.
Figure 2-14
Item Value
Top sheet weight 44 to 74 g/m² (12 to 20 lb)
Total weight 104 to 151 g/m² (28 to 40 lb)
Top sheet thickness 0.086 to 0.107 mm (3.9 to 4.2 mils)
Total thickness 0.115 to 0.145 mm (4.5 to 5.7 mils)
Moisture content 4 to 6 % (composite)
Table 2-5
Top sheet
Not allowed
Allowed
Carrier sheet
Top sheet