Utax CD 1028 Скачать руководство пользователя страница 56

Страница: 56 / 435

Preparation before Use

OPERATION GUIDE

2-23

In the Sys. Menu/Count. menu, press the

key to select [System], and then press the

key.

IMPORTANT:

To make the settings, you must have

logged in using a user ID with administrator privileges.

If you have logged in using a user ID without
administrator privileges, the screen will display

Administrator only.

and return to the standby screen.

In the System menu, press the

key to select

[Network Setting].

Press the

key. The Network Setting menu

appears.

Press the

key to select [AppleTalk].

Press the

key. AppleTalk appears.

Press the

key to select [On] or [Off] and

then press the

key.

Completed.

is displayed and the screen returns to

the Network Setting menu.

Sys. Menu/Count.:

Report

Counter

*********************

[ Exit

]

Administrator only.

System:

*********************

I/F Block Set.

Security Level

[ Exit

]

Network Setting:

*********************

NetWare

AppleTalk

[ Exit

]

AppleTalk

Off

*********************

Содержание CD 1028




















































































































































































































































































































































































































































Результаты поиска

Содержание CD 1028

Отзывы:

Utax CD 1028, Инструкция по эксплуатации, Страница: 56 / 435

Результаты поиска

Содержание CD 1028

Отзывы: