Utax CD 1028 Скачать руководство пользователя страница 348

Страница: 348 / 435

Troubleshooting

OPERATION GUIDE

10-3

Copies have a moire
pattern (dots grouped
together in patterns
and not aligned
uniformly).

Is the original a printed
photograph?

Set the image quality to [Photo].

5-12

Printouts are not
clear.

Did you choose appropriate
image quality for the original?

Select appropriate image quality.

5-12

Printouts are dirty.

Is the platen or the document
processor dirty?

Clean the platen or the document
processor.

—

Is the charger wire dirty?

Clean the charger wire.

—

Printouts are fuzzy.

Is the machine being used in
very humid conditions?

Clean the charger wire.

—

Images are skewed.

Are the originals placed
correctly?

When placing originals on the
platen, align them with the original
size indicator plates.

2-44

When placing originals in the
optional document processor, align
the original width guides securely
before placing the originals.

2-45

Is the paper loaded
correctly?

Check the position of the paper
width guides.

2-45

Paper often jams.

Is the paper loaded
correctly?

Load the paper correctly.

2-28

Is the paper of the supported
type? Is it in good condition?

Remove the paper, turn it over, and
reload it.

2-28

Is the paper curled, folded or
wrinkled?

Replace the paper with new paper.

2-28

Are there any loose scraps or
jammed paper in the
machine?

Remove any jammed paper.

10-11

Printouts are
wrinkled.

Is the paper damp?

Replace the paper with new paper.

2-28

Is the paper set in a proper
orientation?

Change the orientation in which the
paper is positioned.

—

Symptom

Checkpoints

Corrective Actions

Reference

Page

Содержание CD 1028




















































































































































































































































































































































































































































Результаты поиска

Содержание CD 1028

Отзывы:

Utax CD 1028, Инструкция по эксплуатации, Страница: 348 / 435

Результаты поиска

Содержание CD 1028

Отзывы: