Utax CD 1028, Инструкция по эксплуатации, Страница: 375 / 435

Management
11-12 OPERATION GUIDE
Use the procedure below to process jobs sent from unknown users.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the U or V
key to select [User/Job Account], and then press
the
OK key.
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to
Adding a User on page 11-6 for
the default login user name and password.
NOTE:
If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left Select
key) to select the authentication destination.
4
In the User/Job Account menu, press the U or V
key to select [Unknown ID Job].
5
Press the OK key. Unknown ID Job appears.
6
Press the
U
or
V
key to select [Reject] or [Permit].
7
Press the OK key.
Completed. is displayed and the screen returns to
the User/Job Account menu.
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
Login User Name L b
*******************
Login Password:
[ Menu ] [ Login ]
User/Job Account:
a b
1 User Login Set.
2 Job Account. Set.
*********************
[ Exit ]
Unknown ID Job:
a b
*********************
2 Permit