Utax CD 1028 Скачать руководство пользователя страница 356

Страница: 356 / 435

Troubleshooting

OPERATION GUIDE

10-11

Clearing Paper Jams

If a paper jam occurs, a message will be displayed about the jam and copying or printing will stop.

Leave the main power switch on and to remove the jammed paper refer to the following information below.

Jam Location Indicators

If a paper jam occurs, the error message displays the location of the jam.

Precautions with Paper Jams

If a paper jam occurs, a message will be displayed about the jam and copying or printing will stop.

• Do not reuse jammed papers.
• If the paper tears during removal, be sure to remove any loose scraps of paper from inside the machine.

Scraps of paper left in the machine could cause subsequent jamming.

• Discard paper that has jammed in the optional document finisher. A page affected by a paper jam will be

printed again.

CAUTION:

The fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger

of getting burned.

Online Help Messages

When Paper Jam is displayed, press [Help](the

Left Select key) to display the procedure to clear the jam.

Press to display the next step or press

to display the previous step.

Press the

OK key to exit the online help message display.

Multi Purpose Tray

Follow the steps below to clear paper jams in the MP tray.

Paper Jam Location Indicator

Paper Jam Location

Reference Page

Document processor (Option)

10-16

Inside the machine

10-14

MP Tray

10-11

Cassettes

10-12

Duplexer

10-12

Rear cover

10-15

Содержание CD 1028




















































































































































































































































































































































































































































Результаты поиска

Содержание CD 1028

Отзывы:

Utax CD 1028, Инструкция по эксплуатации, Страница: 356 / 435

Результаты поиска

Содержание CD 1028

Отзывы: