Utax CD 1028 Скачать руководство пользователя страница 359

Страница: 359 / 435

Troubleshooting

10-14

OPERATION GUIDE

Inside the Machine

Pull the paper cassette all the way out of the
machine. Remove any partially fed paper.

Open the front cover, and lift the developer unit
together with the toner container out of the
machine.

Remove the drum unit from the machine by holding
the green levers with both hands.

CAUTION:

The fuser unit inside the machine is hot. Do

not touch it, as it may result in burn injury.

NOTE:

The drum is sensitive to light. Never expose

the d

rum

unit to light for more than five minutes.

Содержание CD 1028




















































































































































































































































































































































































































































Результаты поиска

Содержание CD 1028

Отзывы:

Utax CD 1028, Инструкция по эксплуатации, Страница: 359 / 435

Результаты поиска

Содержание CD 1028

Отзывы: