manualshive.com logo in svg

Utax CA-3100, Руководство по обслуживанию


Поделиться
Скачать
background image

[CONFIDENTIAL]

IB-32B

OFF

ON

1

2

5

3

4

6

7

8

9

11

10

16

15

12

13

14

English

Optional Parallel Interface Kit IB-32B
Installation Guide

Introduction

The IB-32B is an optional parallel interface kit for use with the page printers. 
Please read this Installation Guide thoroughly so that you understand the correct 
installation method.
This parallel interface kit can be installed in other models using the same 
installation procedure.

Packing List

IB-32B ................................................................................................................... 1
Plate ...................................................................................................................... 2
Screw .................................................................................................................... 2
Relay cable ............................................................................................................ 1
Seal ....................................................................................................................... 1
Installation Guide (this guide)  ................................................................................ 1

Select a plate and a seal according to the board type of the machine.

Precautions for Handling the Parallel Interface Kit

When handling the parallel interface kit, adhere to the following precautions.
• The parallel interface kit is delivered in an antistatic bag. To prevent any 

damage, briefly touch a large metal object to ensure discharge of static 
electricity before removing the parallel interface kit from the bag.

• Never touch the parallel interface kit’s connector section directly with hands.
• When holding the parallel interface kit, avoid contact with the surface of the 

circuit board. Hold it at the edges.

• Do not apply undue force when installing.

Installing the Parallel Interface Kit
CAUTION
Before installing (or removing) the parallel interface kit, be sure to turn off 
the machine’s power and disconnect the power cord plug from the AC 
outlet.

Verifying Installation of the Parallel Interface Kit

To verify that the parallel interface kit has been correctly installed, try to print out 
the status page.
Refer to the Operation Guide for the method for printing a status page.
The machine may differ from the illustration depending on the type of your 
machine but installation procedure is same for every machine.

Kit d’interface parallèle IB-32B en option
Guide d’installation

Introduction

L’IB-32B est un kit d’interface parallèle en option destiné à être utilisé avec les 
imprimantes par page. Veuillez lire entièrement ce guide d’installation et vous 
assurer que vous comprenez bien les méthodes d’installation.
Ce kit d’interface parallèle peut être installé dans d’autres modèles à l’aide de la 
même procédure d’installation.

Contenu de l’emballage

IB-32B .................................................................................................................... 1
Plaque .................................................................................................................... 2
Vis .......................................................................................................................... 2
Câble de relais ....................................................................................................... 1
Obturateur .............................................................................................................. 1
Guide d’installation (ce manuel) ............................................................................. 1

Sélectionner une plaque et un joint en fonction du type de la carte machine.

Précautions de manipulation du kit d’interface parallèle

Lorsque vous manipulez le kit d’interface parallèle, observez les précautions 
suivantes.
• Le kit d’interface parallèle est livré dans un sac antistatique. Avant de le retirer 

du sac, touchez brièvement un grand objet métallique pour vous décharger de 
toute électricité statique.Vous éviterez ainsi d’endommager le kit d’interface 
parallèle.

• Ne touchez jamais directement la partie du connecteur du kit d’interface parallèle 

avec les mains.

• Lorsque vous tenez le kit d’interface parallèle, ne touchez pas la surface de la 

carte de circuits imprimés. Saisissez-le par les bords.

• N’appliquez aucune force inutile en l’installant.

Installation du kit d’interface parallèle
ATTENTION
Avant d’installer (ou de retirer) le kit d’interface parallèle, mettez toujours 
l’imprimante hors tension et débranchez la fiche du cordon d’alimentation 
de la prise de courant.

Vérification de l’installation du kit d’interface parallèle

Pour vous assurer que le kit d’interface parallèle a été correctement installé, 
essayez d’imprimer la page d’état de l’imprimante.
Pour connaître la méthode d’impression de la page d’état, consultez le manuel 
d’utilisation.
La machine peut différer de l'illustration en fonction du type de votre machine, 
mais la procédure d'installation est la même pour toutes les machines.

Kit de interfaz en paralelo IB-32B opcional
Guía de instalación

Introducción

El IB-32B es un kit de interfaz en paralelo opcional para utilizar con la impresora 
de hojas. Lea completamente esta Guía de instalación de forma que pueda 
entender los métodos de instalación y operación correctos.
Este kit de interfaz en paralelo puede instalarse en otros modelos utilizando el 
mismo procedimiento de instalación.

Lista del contenido del paquete

IB-32B .................................................................................................................... 1
Placa ...................................................................................................................... 2
Tornillo.................................................................................................................... 2
Cable de relé .......................................................................................................... 1
Sello ....................................................................................................................... 1
Guía de instalación (este folleto) ............................................................................ 1

Seleccione una placa y un precinto de acuerdo con el tipo de tarjeta de la 
máquina.

Precauciones para el manejo del kit de interfaz en paralelo

Cuando maneje el kit de interfaz en paralelo, tenga en cuenta las siguientes 
precauciones.
• El kit de interfaz en paralelo se entrega en una bolsa antiestática. Para evitar 

cualquier daño, antes de sacar el kit de interfaz en paralelo de la bolsa, toque un 
objeto metálico grande para descargar la electricidad estática de su cuerpo.

• Nunca toque la sección del conector del kit de interfaz en paralelo directamente 

con las manos.

• Cuando sostenga el kit de interfaz en paralelo, no toque con las manos la 

superficie de la placa del circuito impreso. Sujétela por los bordes.

• No aplique demasiada fuerza al realizar la instalación.

Instalación del kit de interfaz en paralelo
PRECAUCIÓN
Antes de instalar (o desmontar) el kit de interfaz en paralelo, asegúrese de 
desconectar la alimentación de la impresora y de desenchufar el cable de 
alimentación de la toma de corriente de CA.

Verificación de la instalación del kit de interfaz en paralelo

Para verificar que el kit de interfaz en paralelo ha sido instalado correctamente, 
trate de imprimir la página de estado de la impresora.
Consulte la Guía de uso para obtener información sobre la impresión de la página 
de estado de la impresora.
La máquina puede ser distinta de la mostrada en la ilustración según el tipo de 
máquina, pero el procedimiento de instalación es el mismo para todas las máquinas.

Español

Français

D

1

2

B

A

A

C

D

D

D

A

B

C

E

F

For European countries and Australia : 

Содержание CA-3100
































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CA-3100

QMS 1660 Operation preview
1660
Бренд: QMS Страницы: 122
QMS 1660 Reference Manual preview
1660
Бренд: QMS Страницы: 306
Panasonic KX-MC6260E Quick Reference Manual preview
KX-MC6260E
Бренд: Panasonic Страницы: 24
Oki 10i Help Manual preview
10i
Бренд: Oki Страницы: 40
Panasonic Workio DP-1820E Quick Manual preview
Workio DP-1820E
Бренд: Panasonic Страницы: 38
Xerox 4050 Product Reference preview
4050
Бренд: Xerox Страницы: 68
Xerox 460 Installation And Troubleshooting Manual preview
460
Бренд: Xerox Страницы: 210
Xerox 665 User Manual preview
665
Бренд: Xerox Страницы: 89
BCS 4206 Operating Manual preview
4206
Бренд: BCS Страницы: 151
Olivetti d-Copia 42 Operation Manual preview
d-Copia 42
Бренд: Olivetti Страницы: 24
Felix printers Pro 2 Touch Quick Start Manual preview
Pro 2 Touch
Бренд: Felix printers Страницы: 28
Printek DP-530si Operator'S Manual preview
DP-530si
Бренд: Printek Страницы: 34
Lexmark C770n Specification Sheet preview
C770n
Бренд: Lexmark Страницы: 2
Oki C831dn Safety And Warranty Manual preview
C831dn
Бренд: Oki Страницы: 48
Xerox WorkCentre 7200 series Specifications preview
WorkCentre 7200 series
Бренд: Xerox Страницы: 12
Xerox DocuPrint 4508 User Manual preview
DocuPrint 4508
Бренд: Xerox Страницы: 150
Jolimark NP311D Instruction Manual preview
NP311D
Бренд: Jolimark Страницы: 31
Sagem MF 6990dn User Manual preview
MF 6990dn
Бренд: Sagem Страницы: 154

Бренды по названию

Популярные бренды

Загрузить еще бренды