manualshive.com logo in svg

Utax CA-3100, Руководство по обслуживанию


Поделиться
Скачать
background image

[CONFIDENTIAL]

Deutsch

Italiano

Optionales Parallel Interface Kit IB-32B
Installationsanleitung

Einführung

Das IB-32B ist ein optionales Parallel Interface Kit zur Verwendung mit 
Seitendruckern. Bitte lesen Sie sich diese Installationsanleitung sorgfältig durch, 
damit Sie das Gerät korrekt installieren.
Dieses Parallel Interface Kit kann mithilfe des selben Installationsvorgangs in 
anderen Modellen eingebaut werden.

Verpackungsinhalt

IB-32B .................................................................................................................... 1
Platte ...................................................................................................................... 2
Schraube ................................................................................................................ 2
Relaiskabel ............................................................................................................. 1
Dichtung ................................................................................................................. 1
Installationsanleitung (diese Anleitung) .................................................................. 1

Wählen Sie eine Platte und eine Dichtung gemäß der Platinenausführung des 
Geräts.

Vorsichtsmaßnahmen bei der Handhabung des Parallel Interface Kits

Bitte beachten Sie die folgenden Vorsichtshinweise beim Umgang mit dem 
Parallel Interface Kit.
• Das Parallel Interface Kit wird in einem Antistatikbeutel geliefert. Um eine 

Beschädigung zu vermeiden, sollten Sie kurz einen großen Gegenstand aus 
Metall berühren, um sich von statischer Elektrizität zu entladen, bevor Sie das 
Parallel Interface Kit aus der Verpackung entfernen.

• Berühren Sie auf keinen Fall die Steckleiste des Parallel Interface Kits mit 

bloßen Händen.

• Achten Sie beim Halten des Parallel Interface Kits darauf, eine Berührung der 

Platinenoberfläche zu vermeiden. Halten Sie das Parallel Interface Kit stets an 
den Kanten der Platine.

• Vermeiden Sie übermäßige Kraftanwendung beim Installieren.

Installation des Parallel Interface Kits
VORSICHT
Achten Sie vor dem Installieren (bzw. Entfernen) des Parallel Interface Kits 
unbedingt darauf, den Drucker auszuschalten und das Netzkabel von der 
Netzsteckdose zu trennen.

Überprüfung der Installation des Parallel Interface Kits

Um eine korrekte Installation des Parallel Interface Kits zu überprüfen, drucken 
Sie die Statusseite aus.
Die Vorgehensweise für das Ausdrucken einer Statusseite finden Sie in der 
Bedienungsanleitung.
Je nach verwendetem Modell kann das Aussehen geringfügig abweichen, jedoch ist die 
Vorgehensweise zur Installation für jedes Modell gleich.

㝩㊌G⸅⥠G㢬䉤䓌㢨㏘G䇘䏬GpiTZYi
䋔∼G㉘㾌G㙼⇨㉐

㋀ᵐ
piTZYi⏈G䓌㢨㫴G䘸⫤䉤㜄G㇠㟝╌⏈G㝩㊌G⸅⥠G㢬䉤䓌㢨㏘G䇘䏬㢹⏼␘U
⸬G䋔∼G㉘㾌G㙼⇨㉐⪰G㨰㢌G὾᷀G㢱ḔG㝠ⵈ⪬G㉘㾌Gⵝⷉ㡸G㍍㫴䚌㐐ὤGⵈ⣁⏼␘UG
⸬G⸅⥠G㢬䉤䓌㢨㏘G䇘䏬⏈Gᵍ㡴G㉘㾌G㤼㵜⪰G㤵㟝䚌㜠G␘⪬G⯜⒬㜄G㉘㾌╔G㍌G
㢼㏩⏼␘U

䔠㣙G⇨㟝Ɒ
piTZYi UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU GX
䙀⤼㢨䏬UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU GY
⇌㇠UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU GY
⫨⤼㢨G䀴㢨⽈UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU GX
㐘G UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU GX
䋔∼G㉘㾌G㙼⇨㉐GO⸬G㙼⇨㉐PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU GX

㥅㐐㝴Gὤ᷸㢌G⸨☐㢌G㦹⪌㜄G♤⢰G㢬ᵄ㡸G㉔䈑䚝⏼␘U

⸅⥠G㢬䉤䓌㢨㏘G䇘䏬G㼜ἽG㐐G㨰㢌㇠䚡
⸅⥠G㢬䉤䓌㢨㏘G䇘䏬G㼜ἽG㐐SG␘㢀ḰGᵍ㡴G㨰㢌㇠䚡㡸G㫴䁐㨰㐐ὤGⵈ⣁⏼␘U
ˍG ⸅⥠G㢬䉤䓌㢨㏘G䇘䏬⏈G㥉㤸ὤGⵝ㫴G⸽䍠㜄G䔠㣙╌㛨G㢼㏩⏼␘UG⸅⥠G

㢬䉤䓌㢨㏘G䇘䏬⪰G῰⇨ὤG㤸㜄G㋄ㇵ㡸G㜼ⵝ䚌ὤG㠸䚨G䆤GἼ㋁GⱰ㷨⪰G㣔㐐G
⬀㥬㉐G㥉㤸ὤ⪰Gⵝ㫴䚌㐐ὤGⵈ⣁⏼␘U

ˍG ⸅⥠G㢬䉤䓌㢨㏘G䇘䏬㢌G㜤ᷤ⺴⪰G㫵㥅G㋄㡰⦐G⬀㫴㫴G⫼㐡㐐㝘U
ˍG ⸅⥠G㢬䉤䓌㢨㏘G䇘䏬⪰G㣕㡸G⚀⏈G䟀⦐䑄G䖐⮨㜄G␳㫴G㙾⓸⦑G↑⺴⺸㡸G

㣕㡰㐡㐐㝘U

ˍG ㉘㾌G㐐GḰ⓸䚐G䣌㡸Gᴴ䚌㫴G⫼㐡㐐㝘U

⸅⥠G㢬䉤䓌㢨㏘G䇘䏬G㉘㾌
㨰㢌㇠䚡
⸅⥠G㢬䉤䓌㢨㏘G䇘䏬⪰G㉘㾌O❄⏈G㥐ᶤP䚌ὤG㤸SGὤὤ㢌G㤸㠄㡸GⅸḔGhjG
㙸㟤䏬⥏㜄㉐G㤸㠄㉔㡸G⺸⫠䚌㐡㐐㝘U

⸅⥠G㢬䉤䓌㢨㏘G䇘䏬G㉘㾌G䞉㢬
⸅⥠G㢬䉤䓌㢨㏘G䇘䏬ᴴG㝠ⵈ⪨᷀G㉘㾌╌㛼⏈㫴G䞉㢬䚌⥘⮨Gㇵ䈐G䓌㢨㫴⪰G
㻐⥙䚨G⸨㐡㐐㝘UGㇵ䈐G䓌㢨㫴⪰G㻐⥙䚌⏈Gⵝⷉ㜄GḴ䚨㉐⏈G㇠㟝㉘⮹㉐⪰G
㵬Ḕ䚌㐐ὤGⵈ⣁⏼␘U

Kit interfaccia parallela IB-32B opzionale
Guida all’installazione

Introduzione

IB-32B è un kit interfaccia parallela opzionale per utilizzi con stampanti a pagine. 
Si prega di leggere attentamente la presente Guida all’installazione per 
comprendere il corretto metodo di installazione.
Questo kit interfaccia parallela può essere installato in altri modelli che utilizzano 
la stessa procedura di installazione.

Contenuto della confezione

IB-32B ................................................................................................................... 1
Vassoio .................................................................................................................. 2
Vite ........................................................................................................................ 2
Cavo relè  ............................................................................................................... 1
Chiusura ................................................................................................................ 1
Guida all’installazione (la presente guida).............................................................. 1

Selezionare una piastra e un sigillo in base al tipo di scheda della macchina.

Precauzioni d’uso del kit interfaccia parallela

Durante l’utilizzo del kit interfaccia parallela, adottare le precauzioni che seguono.
• Il kit interfaccia parallela è spedito in una custodia antistatica. Per evitare 

eventuali danni, toccare per pochi istanti un oggetto metallico di grandi 
dimensioni per assicurarsi di scaricare l’elettricità statica prima di rimuovere il kit 
interfaccia parallela dalla custodia.

• Non toccare la sezione del connettore del kit interfaccia parallela direttamente 

con le mani.

• Nell’afferrare il kit interfaccia parallela, evitare il contatto con la superficie della 

scheda a circuito. Afferrarlo alle estremità.

• Non esercitare una forza eccessiva durante l’installazione.

Istallazione del kit interfaccia parallela
ATTENZIONE:
prima di installare (o di rimuovere) il kit interfaccia parallela, assicurarsi di 
aver spento l’alimentazione della macchina e di aver disconnesso la spina 
del cavo di alimentazione dalla presa CA.

Verifica dell’installazione del kit interfaccia parallela

Per verificare che il kit interfaccia parallela sia stato installato correttamente, 
stampare la pagina di stato.
Per scoprire le modalità di stampa della pagina di stato, consultare la Guida alle 
funzioni.
La periferica può essere diversa da quella riprodotta in figura in funzione del tipo di 
periferica in uso; tuttavia, la procedura di installazione è identica per tutte le periferiche.

Ь

Ь
Ь
Ь

Содержание CA-3100
































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CA-3100

Xante Illumina Hardware Installation Manual preview
Illumina
Бренд: Xante Страницы: 21
VASTEX V-1000 Installation And Operating Insctructions preview
V-1000
Бренд: VASTEX Страницы: 2
IBM 5218 Setup Procedures preview
5218
Бренд: IBM Страницы: 60
Xerox ColorQube 87 Series Manual preview
ColorQube 87 Series
Бренд: Xerox Страницы: 32
Oki 70037401 Installation Instructions Manual preview
70037401
Бренд: Oki Страницы: 16
Ricoh PRO C7200S Operator'S Manual preview
PRO C7200S
Бренд: Ricoh Страницы: 552
Xerox 8860MFPD - Multifunction Inkjet Printer Evaluator Manual preview
8860MFPD - Multifunction Inkjet Printer
Бренд: Xerox Страницы: 16
Cashino CSN-58III User Manual preview
CSN-58III
Бренд: Cashino Страницы: 61
Panduit TDP42HY Operator'S Manual preview
TDP42HY
Бренд: Panduit Страницы: 85
IBM Model A00 Sales Manual preview
Model A00
Бренд: IBM Страницы: 16
Paaasonic 3d Printer Simplified User Manual preview
3d Printer
Бренд: Paaasonic Страницы: 14
UnionTech Martrix Series User Manual preview
Martrix Series
Бренд: UnionTech Страницы: 44
Xerox Phaser 6200 Brochure & Specs preview
Phaser 6200
Бренд: Xerox Страницы: 4
DataCard SD Series User Manual preview
SD Series
Бренд: DataCard Страницы: 106
Toolots HCmaker20 User Manual preview
HCmaker20
Бренд: Toolots Страницы: 21
Epson WorkForce 610 Series Service Manual preview
WorkForce 610 Series
Бренд: Epson Страницы: 52
Epson WorkForce 630 Start Here preview
WorkForce 630
Бренд: Epson Страницы: 4
Epson WorkForce 545 Series Start Here preview
WorkForce 545 Series
Бренд: Epson Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды