manualshive.com logo in svg

Utax CA-3100, Руководство по обслуживанию

Поделиться
Скачать
Utax CA-3100 Скачать руководство пользователя страница 284

[CONFIDENTIAL]

HD-6/HD-7

OFF

ON

1

2

3

4

5

6

English

Optional SSD HD-6
Installation Guide

Introduction

The HD-6 is an optional SSD for use with the MFPs and the page printers. Please 
read this Installation Guide thoroughly so that you understand the correct 
installation method. This SSD can be installed in other models using the same 
installation procedure.

Packing List

HD-6 .......................................................................................................................1
Installation Guide (this guide) .................................................................................1

Precautions for Handling the SSD

When handling the SSD, adhere to the following precautions.
• The SSD is delivered in an antistatic bag. To prevent any damage, briefly touch 

a large metal object to ensure discharge of static electricity before removing the 
SSD from the bag.

• Never touch the SSD’s connector section directly with hands.
• When holding the SSD, avoid contact with the surface of the circuit board. Hold 

it at the edges.

• Do not apply undue force when installing.

Installing the SSD
CAUTION
Before installing (or removing) the SSD, be sure to turn off the machine’s 
power and disconnect the power cord plug from the AC outlet.

Formatting the SSD

After installing the SSD in the machine, the SSD must to be formatted before 
used. Formatting is performed from the machine’s operation panel.
Refer to the Operation Guide for the formatting of the SSD.

Verifying Installation of the SSD

To verify that the SSD has been correctly installed, try to print out the status page.
Refer to the Operation Guide for the method for printing a status page.

Содержание CA-3100
































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды