Utax CA-3100, Руководство по обслуживанию

Страница: 161 / 287

6-8
Service mode
＞
Service settings
[CONFIDENTIAL]
(48) USB information U00: Not Connected
U01: Full speed
U02: Hi speed
(49) Paper handling information 0: Paper source unit select/1: Paper source unit
(50)
Auto cassette change 0: OFF/ 1: ON
(51) Color printing double count mode 0: All single counts
3: Folio (Less than 330 mm length), Single counts
(52)
Black and white printing double count
mode 0: All single counts
3: Folio, Single count, Less than 330 mm (length)
*: The count mode can be changed using a PRESCRIBE
command.
When the double count is set for the paper other than the
sizes of A4, B5, A5, Folio, Legal, Letter, and Statement, the
counter value is indicated as "Other 1" in the status page.
When in the same way, the single count is set, the counter
value is indicated as "Other 2". In the operation panel, the
counter values are indicated as "Other 1" or "Other 2".
(53)
Temperature (machine inside) -
(54) Temperature (machine outside) -
(55)
Relative humidity
(machine outside) -
(56) Absolute humidity
(machine outside) -
(57)
Humidity (machine inside) -
(58) LSU temperature -
(59)
LSU 2 temperature -
(60) DRT parameter coefficient -
(61)
Fixed assets number -
(62) Job end judgment time-out time -
(63)
Temperature (machine inside) -
(64) Job end detection mode 0: It is as one job even if it includes multiple jobs in the job
received with network connection.
1: If it includes multiple jobs in the job received, detect the
break point between jobs and divide them.
(65)
PRESCRIBE environmental reset 0 : Off
1 : On
(66) Media type attributes
1 to 28 (Not used: 18, 19, 20)
For details on settings, refer to MDAT
command in “Prescribe Commands
Reference Manual.
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1 Duplex settings
5: Heavy 2 0: Disable
6: Heavy 3 1: Enable
7: Extra Heavy
No. Description Supplement