UTAH SCIENTIFIC UTAH-100/UDS 10x10, Настройка и эксплуатация системы

Страница: 19 / 131

Section 1 1-3
Introduction
Section 1
System Architecture
Each of the three possible configurations begin with a Base Crosspoint card, the
121352-1. This card contains all control circuitry, crosspoints, 8 dedicated inputs, 10
dedicated outputs, and two Bi-Directional ports. This card also has two expansion slot
connections for additional boards.
For a 10x10 router, only this base card is used.
For a 20x20 router, an Input Expansion board (121353-1) and an Output Expansion Board
(121354-1) is added to the Base Crosspoint.
For an 8x32 DA product, both expansion slots are filled with Output Expansion Cards and
the system automatically makes the bidirectional ports Outputs when this configuration is
recognized, resulting in an 8x32 port system.
Each system can contain a local control panel. The default configurations have the 8x32
without a local panel, the 10x10 with a local 20 button panel, and the 20x20 with a local 40
button panel. These local panels have a fixed configuration that is not changeable from the
control system. If more advanced panels are desired, systems can be ordered without
local panels and the UDS-CP or UDS-XY can be added as external panels.
Figure 1-2. UDS-XY
The front panels include generic labels that can be changed to suit your installation.
(See Appendix D for more information)