18
Step Limits Tab
Select the
Step limits
tab (Figure 20) to enter the Step Limits screen. Step limits are
parameters/logic each step must fall within to pass or fail a step. If the step logic is not
achieved, a fail/reject is given before moving to the next step.
Each step must have a sensor selected to examine for a pass/fail.
Figure 20: Step Limits Screen
Jumps Tab
Select the
Jumps
tab (Figure 21) to enter the jump screen. The jump screen is used to
configure which step or program the test will jump to based on the result condition of the
step (accept or reject).
Figure 21: Jumps Screen
