Usl JSD-60 Скачать руководство пользователя страница 28

Страница: 28 / 96

Page 28

server. System status and basic control are available on internally generated web

pages. System status is also available over SNMP. The JSD-‐60 also includes a Network Time

Protocol (NTP) client that can be used to keep the internal real time clock accurate. Use a CAT5

or better Ethernet cable to connect the JSD-‐60 to the control network.

Graphical User Interface Configuration

System Configuration using the Graphical User Interface

The graphical user interface (GUI) allows for

configuration and monitoring of the JSD-‐60. When

installed, the JSD-‐60 GUI programs item and a desktop

shortcut are created. The application is located in the c:\Programs (x86)\USL\JSD-‐60 Cinema

Processor folder. The JSD-‐60 SetIP utility, User Manual, and DPInst64 USB driver are located in

this folder.

8.1

GUI FILE ORGANIZATION

The GUI installer places the executable program files in the
Programs (x86) \USL\JSD-‐60 directory. Configuration files

are placed in Documents\USL\JSD-‐60 as shown.

•

The EQ Curves directory holds data for generating

limit curves for the RTA and automatic equalization. Standard curve data for several

auditorium sizes are provided. Since these are plain text files, custom limit curves can be

easily created.

•

The Microphone Library holds calibration data on microphones used on the RTA. A

separate file can be created for each microphone used with the system. The file includes

the required preamp gain and frequency response adjustment.

•

The Speaker Library holds crossover configuration files for a wide range of biamp
speaker systems. These are also text files, so appropriate crossover settings for

additional speaker systems can be created using a text editor such as Note Pad.

See Appendix E for configuration file formats.
8.2

GUI INSTALLATION

The GUI runs under Windows® XP, Windows® 7, or Windows® 8 operating systems. Insert the

supplied CD and follow the on-‐screen instructions.

Note: The USB driver needs to be installed after the GUI is installed. Follow the USB Driver

Installation instructions.

Содержание JSD-60

































































































Результаты поиска

Содержание JSD-60

Отзывы:

Бренды по названию

Популярные бренды

Usl JSD-60, Руководство пользователя

Результаты поиска

Содержание JSD-60

Отзывы:

Бренды по названию

Популярные бренды