DAX-‐16 Installation & Operation Manual
Rev 1.4
3
Safety Noti
ce
Review the following safety precautions to avoid injury and prevent damage to this product. To avoid
potential risk, use this product only as specified and only for the purpose described in the instruction
manual.
To Avoid Fire and Personal Injury:
•
Use correct power cable
. Use only the power cable provided. Ensure that the AC power outlet is
located near the product and is easily accessible.
•
Use a correctly grounded power source.
The power supply earth ground is established through the
ground conductor in the power cable. To avoid the potential of electric shock, the ground
conductor must be correct.
•
Observe source ratings.
To avoid risk of fire or electric shock, the power source must be 100 – 240
VAC, 50 – 60 Hz.
•
Do not operate with suspected failures.
If you suspect there is damage or malfunction with this
product, call the factory.
•
Do not attempt repair.
Only a trained factory service person is authorized to repair this product.
•
Do not operate this product near heat sources.
This product should not be located near heat
sources
such as radiators, heat registers, or stoves.
•
Provide proper ventilation.
The operating temperature range is between 0º C and 40º C. The
humidity range is between 20% and 80%, non-‐condensing. The cooling method is convection.
•
Keep product surfaces clean and dry.
Disconnect the power cable from the power source before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
•
Do not push objects into openings of this product.
Never insert objects into the product through
openings.
•
Do not operate in wet or damp conditions.
•
Do not operate in an explosive atmosphere.
•
Inspect the power cable and all cables prior to use.
Confirm that the power cable and other
interconnecting cables are free from damage.
Le
gal Notices
The DAX-‐16 includes technology used under license from Harman International Industries.
Regulatory Compliance
EN 60950-‐1
The EN 60950-‐1 standard specifies the safety design requirements that reduce or eliminate the risk of
personal injury to both the product user and service personnel. This product is designed and tested to
meet the standards of the International Electrotechnical Commission (IEC) European Norm EN 60950-‐1,
IEC 60950-‐1 (the standard for information technology equipment including electrical business
equipment).
Le Résumé de la Sécurité general Européen
