Ushio UIT-250, Руководство по эксплуатации

Страница: 26 / 40

20
1000033244-00
4. Instructions for use
4-4. Serial Communication Function
The UIT-250 has a serial communication function and the serial communication cable
that comes with the unit can be connected to the serial port such as the PC-AT port of
a personal computer (hereafter: PC).
Through connecting the UIT-250 to a PC, the following can be performed.
- Reading of irradiance distribution data
- Confirmation of samples/second
- Selection of measurement range
- Measurement of irradiance (temperature)
The specification for the communication function of the UIT-250 is as described be-
low:
Communication specification: Half duplex
Synchronization method: Start/stop synchronization (asynchronous)
Baud rate: 4800 bps (fixed)
Transmission code: ASCII
Data length: 8 bit (fixed)
Stop bit: 1
Parity: None
Delimiter: CR
This function is used mutually exclusive with the analog output of the distribution
measurement function of irradiance (temperature). Analog output can not be performed
while the communication function is operating. Note, PC communication software
does not come with this unit. Please prepare separately.
In this document, unless otherwise indicated CR designates "Hex 0d" in the ASCII
code.