Ushio UIT-250, Руководство по эксплуатации

Страница: 17 / 40

11
1000033244-00
4. Instructions for use
(3) When viewing the operation panel surface, slide the heat shield cover.
The heat shield cover is prevented from being removed from the UIT-250 by
stoppers.
(4) When performing measurement, slide the heat shield cover until only the pho-
todetector surface can be seen.
The heat shield cover and UIT-250 are fixed in place by magnets.
(5) When removing the heat shield cover from the UIT-250, remove the flat head
screws from both sides of the unit with the heat shield cover fully in place and
slide the heat insulation panel towards the bottom of the exposure meter body.
Warning
When placing on the conveyor of the UV radiation hardening equip-
ment (UNICURE) that has a conveyor, the heat shield cover surface
may rise above 60
°
C. This is a possible cause of burns etc. therefore
care must be taken when handling.