USC LPV Series, Руководство оператора

Страница: 39 / 47

Page 39
LPV SEED TREATER
DRIVE AND DRUM
•
Remove drum guards and inspect all welds and structural components on the
frame and drum for bends, cracks and damage.
•
Inspect pillow block bearings and grease every 40 hours of operation.
•
Inspect drive wheels for unordinary wear and set screws for tightness.
•
Inspect the Neoprene idler wheels for unordinary wear and adjust if necessary.
•
Remove drive guards, check tension and lubricate chain every 40 hours
of operation. Adjust tension as required.
•
Wipe down the motor casing with a damp cloth making sure to remove all dust that
may have collected since the last maintenance date. Record the cleaning on the
company required documents. If operating in a CSA 22.1, Class II, Division 2,
Group G hazardous area, USC recommends this step be performed on a daily
basis.
•
Essuyez le carter moteur avec un chiffon humide en veillant à éliminer toutes les
poussières qui peuvent avoir perçu depuis la dernière date de maintenance.
Enregistrez le nettoyage sur la société les documents requis. Si opérant dans un
CSA 22.1, Classe II, Division 2, Groupe G zone dangereuse, USC recommande
cette étape être effectuée sur une base quotidienne.
ELECTRICAL PANEL
•
Check and tighten wire connections.
•
Check quick connects on bottom of control panel.
•
Check to see if starters and/or overloads are tripped.
•
Check to see if relays, timers and/or breakers are tripped.
•
Check and set the proximity switches. (page 37).
•
Check quick connects on end of Auxiliary cord.
•
Check relay and fuse holder.
•
Check power cords for cuts or frays and ensure ground is present.