5
2) Lubricate the distributor O-ring and the tank O-ring. Then install the upper basket (may
look different than the pictures below) on the bottom of the valve by lining up the tabs then
turning the basket to lock it in place. Place the upper basket over the distributor tube and
push the valve on the tank. Thread the valve on the tank by turning it clockwise. Be sure not
to cross-thread the valve on the tank. Tighten the valve hand tight, then snug it further by
tapping it with the palm of the hand. DO NOT use tools to tighten the valve or damage could
occur.
Aquatrol Tank and Control Valve Preparation
Installation, Operation and Maintenance Manual
AQF-CX-100 & AQF-CX-200
