sec.3e
−−−−
3
2 VOICE - Technical Manual
PUSH BUTTON PANEL
DESCRIPTION OF TERMINALS
]
SE2
Driveway electric lock activation
PA
]
Hall button
PA
SP
]
Open door detector
SP
- Not used
+ Not used
]
ILL
Power supply for name tags lighting
]
LINE Bus line in
SE- Negative for pedestrian crossing electric lock
SE+ Positive for pedestrian crossing electric lock
VIDEO Connector for camera module Ref. 1748/83
EXP Connector for expansion module ref. 1083/17
I2C Connector for voice message and LED module
Ref.
1158/47
ILA Connector for module with hearing aid device
Ref.
1158/48
TECHNICAL CHARACTERISTICS
Direct current power voltage (LINE): .............................
36 – 48 V
Stand-by consumption: ....................................................
Max 45 mA
Max. consumption (call in progress and name tags on):
Max 250 mA
Name holders lighting ILL output: ...........
11– 13,8 V
Max 200 mA
Name holder light: ....................................................................
32 max
Lock output SE+ and SE-:..........................
22 – 24 V
Max 240 mA
SE2 switched load: ........................................
Max 200 mA @ 30 V
Operating temperature range: ..................................
-10 °C ÷ + 50 °C
DEFAULT CONFIGURATION
Function
Default
Corresponding
Dip-switch
PE type:
Main (OFF) Dip-switch 1 of AUX
Secondary number:
0 (OFF)
Dip-switch 2 of AUX
Door opener:
Free
(OFF)
Dip-switch 3 of AUX
Interruption:
Not
assured
(ON)
Dip-switch 4 of AUX
Camera LED on:
Enabled
(ON)
Dip-switch 5 of AUX
Guaranteed conversation time:
30 s
(pos 3)
Rotary switch -
CONV TIME
Door lock release time:
1 s
(pos 0)
Rotary switch -
DOOR TIME
Door unit number:
0 (OFF)
Dip-switch 1÷5 of ID
=
=
ON
ON
INSTALLATION
1. Install the module at the height shown
2. Fit the module holder frame in the
fl
ush- mounting box
3. Fit the modules in the frame
4. Tip the frame and connect wires
5. Close the frame
6. Remove the extractable front panel
7. Set the dip-switches
8. Fit the name tags on the removable front
9. Fit the panel on the frame
PUSH BUTTON PANEL SINTHESI STEEL
AUDIO DOOR UNIT WITH 2 BUTTONS Ref.1083/64 (1 MODULE)
PULSANTIERA SINTHESI STEEL
2
Ref. 1158/41
Ref. 1158/42
Ref. 1158/43
Ref. 1158/44
Ref. 1145/51
Ref. 1145/52
Ref. 1145/53
Ref. 1145/54
3
1
1,55 ÷ 1,60 m (*)
(*) For disabled or special needs users of the
D1 type (elderly) and D2 type (lower limb
motor difficulties),
the centre of the device
must be arranged at a height comprised
between 75 cm and 140 cm with respect to
the floor. For more details, see technical
standard CEI 64-21:2016-12 – Residential
environments. Systems suited for use by
people with disabilities or special needs.
