24
−−−−
sec.3e
2 VOICE - Technical Manual
PUSH BUTTON PANEL
The door unit will beep twice every second and the yellow LED will
light up to indicate the programming status.
2. To activate the function, hold the single button shown on the
drawing pressed for longer than 5 seconds.
Beep
3. When the door unit recognises a long press on the button it will
generate a long beep (approximately 1s) to indicate that it was
programmed.
4. After the long con
fi
rmation beep, the door unit will go back to
generating two beeps a second to indicate programming state.
5. Restore the rotary switches to the initial position to quit
programming mode.
DEACTIVATING THE FUNCTION
1. Enter programming mode by setting the CONV. TIME rotary switch
to position 9 and the DOOR TIME rotary switch to position 6. The
door unit will beep twice every second and the yellow LED will light
up to indicate the programming status.
2. To deactivate the function, hold the single button shown on the
drawing pressed for longer than 5 seconds.
Beep
3. When the door unit recognises a long press on the button it will
generate a long beep (approximately 1s) to indicate that it was
deactivated.
4. After the long con
fi
rmation beep, the door unit will go back to
generating two beeps a second to indicate programming state.
5. Restore the rotary switches to the initial position to quit
programming mode.
The function can also be deactivated by performing the general
PROGRAMMING DATA DELETION procedure.
SELECTIVE AUTO-ON IN ODD AND EVEN GROUPS
(FUNCTION 97 - Ref. 1083/64)
HOW IT WORKS
The user group with even ID code can engage in audio and video
mode the door units with address equal to ID=0 (if secondary) or ID=2;
on the other hand, the users with odd ID code can engage in audio
and video mode the door units with odd address ID=1 (both main
and secondary) or ID=3. During selected door unit auto-on function,
picking up the handset will establish the audio line and the door
opening function.
HOW TO PROGRAM
1. Enter programming mode by setting the CONV. TIME rotary switch
to position 9 and the DOOR TIME rotary switch to position 7. The
door unit will beep twice every second and the yellow LED will light
up to indicate the programming status.
2. To activate the function, hold the single button shown on the
drawing pressed for longer than 5 seconds.
Beep
3. When the door unit recognises a long press on the button it will
generate a long beep (approximately 1s) to indicate that it was
programmed.
4. After the long con
fi
rmation beep, the door unit will go back to
generating two beeps a second to indicate programming state.
5. Restore the rotary switches to the initial position to quit
programming mode.
NOTES:
The function works with main and secondary video door units,
except for the MAIN door unit with ID=0, on which all users must
be able to activate the auto-on function.
The described
fi
lter only works when the selective auto-on
function is activated on the installed door units. When it is not
programmed, the odd and even user codes are not differentiated.
For example, with function active on MAIN door unit 1 (odd) and
deactivated on MAIN door unit 3 (also odd), the user with ID 16
(even) cannot engage VP1 but will be able to engage VP3.
A video door unit (VPE) means a Push button panel with integrated
camera or audio-only door unit with set-up for connecting an
external camera.
DEACTIVATING THE FUNCTION
1. Enter programming mode by setting the CONV. TIME rotary switch
to position 9 and the DOOR TIME rotary switch to position 7. The
door unit will beep twice every second and the yellow LED will light
up to indicate the programming status.
2. To deactivate the function, hold the single button shown on the
drawing pressed for longer than 5 seconds.
Beep
3. When the door unit recognises a long press on the button it will
generate a long beep (approximately 1s) to indicate that it was
deactivated.
4. After the long con
fi
rmation beep, the door unit will go back to
generating two beeps a second to indicate programming state.
•
•
•
PUSH BUTTON PANEL SINTHESI STEEL
ADVANCED CONFIGURATION
PUSH BUTTON PANEL SINTHESI STEEL
