2
−−−−
sec.3e
2 VOICE - Technical Manual
PUSH BUTTON PANEL
PUSH BUTTON PANEL SINTHESI STEEL
Sinthesi Steel is the modular vandal-proof push button panel
characterised by a high degree of safety and an unmistakable design.
The steel structure in one block and the use of special Torx screws
guarantees high degree of resistance from attempts to damage it. The
streamline and modern design provides simple access to a full range
of functions. It has IK09 classi
fi
ed protection against external impacts,
and IP45 classi
fi
ed resistance to liquid and
fi
ne dust ingress.
The device shown in the
fi
gure is made using audio door
units Ref. 1083/64 and camera Ref. 1758/83.
AUDIO DOOR UNIT WITH 2 BUTTONS
Ref.1083/64 (1 Module)
The door unit Ref. 1083/64 is dedicated to Voice system. It consists of
a one module Sinthesi Steel unit with two calling buttons.
DEVICE DESCRIPTION
Two pre-wired call buttons.
4 expansion modules Ref. 1083/17 or 16 modules with expansions
Ref. 1158/82 and Ref. 1158/84 can be installed (connected in
series) up to 64 user buttons max. for each door unit.
By means of dip-switches it is possible to program and associate
code sequences with the call buttons.
Video-audio signals of system busy.
Pedestrian electric lock command actuator. Programmable timing
with rotary-switch from 1 to 90 seconds.
Driveway electric lock command actuator with clean contact.
Electric lock management: Free or Secret.
Predisposition for electric lock activation with entrance hall
button.
Input for open door detector.
Trimmer for adjusting loudspeaker and microphone audio level.
Output for power supply of name holders lighting (up to 32 buttons
with the power supply unit Ref. 1083/20A).
Audio repeater device for hard of hearing people.
Connectors for connection to the camera module Ref.1758/83,
voice message module and Led Ref. 1158/47 and module for
hearing impaired people module Ref. 1158/48.
Call button con
fi
guration for special function.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PUSH BUTTON PANEL SINTHESI STEEL
AUDIO DOOR UNIT WITH 2 BUTTONS Ref.1083/64 (1 MODULE)
STRUCTURE
1
9
2
3
4
AUX
ON
DIP
4
3
2
15
ON
DIP
4
3
2
15
0
5
3
8
4
9 1
6
2
7
0
5
3
8
4
9 1
6
2
7
CONV
TIME
DOOR
TIME
ID
6
8
7
15
10 11 12 12 14
REAR VIEW
FRONT VIEW
1. Microphone
2. Signalling
yellow
led
3. Pre-wired
buttons
4. Name
holders
5. Loudspeaker
6. Auxiliary
settings
dip-switch
7. Rotary-switch for pedestrian door lock release activation time
8. Busy time rotary-switch
9. Identi
fi
cation code dip-switch
10. VIDEO IN: Connector for camera module Ref. 1758/83
11. EXP: Connector for expansion buttons module Ref. 1083/17 or
for expansion modules Ref. 1158/8x
12. I2C: Connector for module with voice messages and led Ref.
1158/47
13. ILA: Connector for hearing impaired people module Ref.
1158/48
14. Jumper JP1: not used, do not remove. JP2: enables the video
output if the camera unit Ref. 1758/83 (ON by default, shift to off
in case of audio only system without camera).
JP2
JP1
OFF
ON
15. Terminal blocks
PUSH BUTTON PANEL SINTHESI STEEL
