urmet domus SCS Sentinel PRO MCO0099, Руководство пользователя

Страница: 31 / 39

31 EN
Placed at the top left of PCB
D- SETTING / USING D- SETTING / USING
To program a remote control : Press «RF-Learn» button for 2 seconds, and the LED display shows «CS». Then
push any button of the transmitter; the LED flashes twice and then be off. And the remote memory has completed
(picture 1,2 et 3)
You can now use your remote control as follow :
To cancel the remote controls memory :
Press and maintain the «RF-Learn» button until the LED display indicates (approx. 10 s.).
Affichage
LED
2 Sec
Affichage LED
clignote 2 fois
LED écran éteint
1 3
13 14
ON
OFF
LED2
LED1
2
D1 Remote controls
D2 System learning process, reset process and LED display
LED
viewer
LED viewer
flashes twice
LED screen turns
off
The remote control memory storing operation must be over before starting the final system learning
process.
(1) To complete the system learning process, disengage your gate and remove it in the middle. Then re-engage
it again.
Step 1 : Simultaneously hold «SET» + «DOWN» for 3 seconds, the LED display shows « LE » (Pictures 1,2 and 3,
see following page)
Step 2 : Press the button on the top left of your remote control during 1 to 3 seconds, the LED display shows then
« LP » (Pictures 4 and 5)
Step 3 : The gate goes to auto-learning. It means it closes a first time then opens and closes again. Please wait
for the learning process to be completed.
pedestrian
opening
Lock button
(By default it is locked, so the buttons of your
remote control are inactive). To use the remote
control, unlock the lock button (the LED light up
each time you press a button).
full opening
LED
release relay exit EXT+
EXT-