urmet domus Easy Dome IV 1092 Series, Инструкция по установке и эксплуатации

Страница: 79 / 116

DS1092-121 79
4.4.2 ZOOM FUNCTIONS
The camera frame may be adjusted by using the
ZOOM +
and
ZOOM -
commands. Use
ZOOM +
to zoom into the detail;
use
ZOOM -
to zoom out.
Enlargement can be set choosing from the values of optical zoom X36 (1092/675 and 1092/676) or X28 (1092/674).
For further details, refer to the specific section of control mode settings.
4.4.3 FOCUSING FUNCTIONS
The camera focus may be adjusted manually using the
FOCUS +
and
FOCUS -
controls.
As the autofocus function is always on, a manual setting made using
FOCUS +
and
FOCUS -
will be kept only until a
pan, tilt or zoom command is used. In this case, autofocus will adjust focus automatically again.
Refer to the specific section for additional details on focusing and on the various options.
e
IMPORTANT NOTE
The autofocus function cannot work correctly in the following cases:
The object to be focused on it not in the middle of the image.
There are far and near object in the frame.
Bright light is shining on the subject.
The subject is behind a glass pane covered in drops or dust.
The subject is moving very quickly.
The subject is not well lit.
The subject is too big.
4.4.4 IRIS OPENING FUNCTIONS
The iris opening may be controlled manually using the
OPEN
and
IRIS-
commands.
The manual setting made using
IRIS+
and
IRIS-
will be kept only until a pan, tilt or zoom command is used if the
automatic iris opening option is enabled (the default setting is on). In this case, the opening will be controlling
automatically again.
Refer to the specific section for additional details on iris opening adjustment.
4.4.5 PRESET POSITIONS PROGRAMMING AND RECALLING
The Easy Dome IV camera can store up to 200 panning, tilting and zooming configurations (called preset positions)
which can be recalled at any time.
The manual focusing and iris opening settings cannot be stored.
e
IMPORTANT NOTE
When saving presets, remember that, from 51 to 63, from 78 to 101 and from 171 to 186, the presets are reserved and
cannot be saved or used to position the camera.