urmet domus Easy Dome IV 1092 Series, Инструкция по установке и эксплуатации

Страница: 66 / 116

DS1092-121 66
3.2.1 WALL INSTALLATION USING A BRACKET REF. 1092/703
Identify the camera installation point and proceed as follows:
Include a connection box for making connections and fitting the power unit, if required.
Drill holes according to the type of wall (cement, wood, etc.) and the fastening devices used.
If the type of installation includes laying of cables in sight, unscrew the plug on the lower part of the bracket with
a slot type screwdriver and insert all the functioning cable of the dome inside the bracket, providing a suitable
protection conduit for the cables.
Insert the connection cables (power-video-data) inside of the bracket until they exit from the opposite side.
Fasten the bracket Ref.1092/703 to the wall.
Open the flap inside the housing to access the connection terminals.
Screw the housing securely to the bracket fastened previously to the support and, using the special screwdriver
provided, secure this with the screw located on the end of the bracket.
Make the connection necessary for functioning of the dome, inserting the male connector of the cable provided
of the housing 1092/700 in the female connector present inside this.