urmet domus Easy Dome IV 1092 Series, Инструкция по установке и эксплуатации

Страница: 102 / 116

DS1092-121 102
Option Value Explanation
CLOCK DISPLAY ON/OFF
If enabled (ON), this option allows to see on the monitor the
current time in hour, minutes, seconds.
DATE DISPLAY ON/OFF
If enabled (ON), this option allows to see on the monitor the
current date in the selected mode.
DISPLAY MODE D-M-Y/Y-M-D-
This option allows to select the date sequence: D-M-Y – Day-
Month-Year or Y-M-D – Year-Month-Day .
DATE TIME MODIFY
This option allows to enter and change the data of date and
time (see below).
DATA TIME MODIFY submenu of DATA TIME SETUP menu
Select the option <DATA TIME SETUP> to go to the above screen, that allows to change the parameters of YEAR,
MONTH, DAY, HOUR, MINUTES, SECONDS.
SCHEDULE submenu of DATA/TIME menu
The submenu SCHEDULE concerns the use of the dome in automatic mode, after a programming procedure.
The Easy Dome III allows the user to select up to 8 actions max. (Preset, Pattern, PanScan, VectorScan), previously
programmed, that will be automatically performed by the Dome in the selected day and time.
DATA TIME MODIFY
1 Year 9
2 Month 3
3 Date 9
4 Day Mon
5 Hour 16
6 Minute 29
7 Second 11
SCHEDULE
1 Number 1
2 Program
3 Enable ON