3.1.1
CHAN
This item (not selectable) lists all the channels of the device.
3.1.2
STATUS
This item (not selectable) shows the status of each video channel by means of a series of LEDs.
The following modes can be displayed:
!"
!
the channel is not active
!"
green
!
the channel is recording (manual, real time, motion detection, external alarm)
!"
red
!
transmitting on the network
!"
amber
!
recording and transmitting on the network
3.1.3
START/STOP
This option is used to start/stop the recording on a certain video channel.
To set, select the respective check box using “
"#
” and press “
ENTER
” or “
EDIT
”.
Symbol “
” indicates that recording can be started on a selected channel; symbol “
×
” indicates that the recording can be stopped.
The following will light up on a channel when recording is started:
!"
pink icon on the camera status bar shown on the monitor.
3.1.4
START ALL
Select this option and press “
ENTER
” or “
EDIT
” to start recording all video channels at the same time.
3.1.5
STOP ALL
Select this option and press “
ENTER
” or “
EDIT
” to stop recording all video channels at the same time.
IMPORTANT NOTE
To proceed with manual recording:
!"
the user must have the corresponding privileges
!"
at least one hard disk must be installed in the device
!"
the hard disk must be formatted
DS1093-024
43
