
| 15
Maintenance and Service
Maintenance and Service
Run through the procedures in this section to ensure the
fireplace system is clean and working properly at least
once a year.
Inspect the following:
• Check the burner to see if all the ports are clear and
clean.
• Check the pilot to make sure it is not blocked by
anything. (The pilot flame should be blue with little or
no yellow tips.)
• Visually check pressure relief gasket for damage or
deterioration (replace if necessary).
• Clean inner glass (see page 20 for removal
instructions). Use a soft, lint free cloth with a mild glass
cleaner to ensure no residue is left behind.
WARNING
Failure to reposition parts in accordance with this
manual, or failure to use only parts specifically approved
with this appliance may result in property damage or
personal injury.
Caution:
Label all wires prior to disconnection when
servicing controls. Wiring errors can cause improper and
dangerous operation. Verify operation after servicing.