UPS Aviation Technologies Apollo SL70R, Руководство по установке

Страница: 9 / 52

General Information
Apollo SL70R Installation Manual
1
1. G
ENERAL
I
NFORMATION
1.1 A
BOUT
T
HIS
M
ANUAL
This manual describes the installation of the Apollo SL70R transponder. It is intended
for use by persons certified by the Federal Aviation Administration (FAA) to install air-
craft avionics.
Provides
GENERAL INFORMATION
about the Apollo SL70R unit. TSO
certification information is also included in this section.
Includes
INSTALLATION
and checkout procedures.
Includes complete
POST
-
INSTALLATION AND CONFIGURATION PROCE-
DURES
.
Includes
TROUBLESHOOTING
information.
Includes
LIMITATIONS
for the equipment and installation.
Includes
PERIODIC MAINTENANCE
requirements.
Includes
SERIAL SPECIFICATION
information.
Includes the
ENVIRONMENTAL QUALIFICATION FORM
.
1.2 A
POLLO
SL70R D
ESCRIPTION
The Apollo SL70R is an incomplete system and when connected to an appropriate host,
will function as a TSO-C74c, Class A2, mode A/C transponder. The SL70R, in addition
to providing replies to ATC interrogations, can provide altitude reporting, squawk code
selection, and has built-in self-test and diagnostics.
1.2.1
G
ENERAL
F
EATURES
•
small footprint
•
remotely mounted
•
full range input supply voltage
•
altitude reporting
•
gray code or RS-232 serial data altitude input
•
RS-232 altitude data output
•
built-in self-test and diagnostics
•
host controlled
Section 1
Section 2
Section 3
Section 4
Section 5
Section 6
Section 7
Appendix A