UPS Aviation Technologies Apollo SL70R, Руководство по установке

Страница: 45 / 52

Serial Interface Specification
Apollo SL70R Installation Manual
37
7.4.5.1 I
NTERFACE
S
PECIFICATION
Buffer Length 8 bytes
7.4.5.2 S
ET
O
PERATION
F
ORMAT
S
PECIFICATION
Table 7-17. P1 Pulse Message Format
Byte Contents Description
0 ‘#’ ASCII ‘#’ (0x23)
1 ‘S’ ASCII ‘s’ (0x53)
2 ‘O’ ASCII ‘O’ (0x4f)
3 ‘ ‘ ASCII space (0x20)
4 ‘d‘ ASCII argument see table below
5-6 dd Checksum of bytes 0 through 4. In hex ASCII i.e. “FA”
7 ‘\r’ ASCII carriage return (0x0D)
Table 7-18. Arguments
Definition ASCII
1 Setup Mode
31
7.4.5.3 S
ET
O
PERATION
E
XAMPLES
#SO 116 Set operation to setup mode
7.5 S
ETUP
M
ODE
M
ESSAGE
D
EFINITIONS
7.5.1
O
UTPUT
M
ESSAGES
Note: Normal output messages are also output in setup mode.
7.5.2
EEP
ROM
D
ATA
The eeprom data message provides the 16-bit data at the specified eeprom location. The
location is specified by the view eeprom serial message, see section 7.5.6.
7.5.2.1 I
NTERFACE
S
PECIFICATION
Buffer Length 14 bytes
7.5.2.2 EEP
ROM
D
ATA
F
ORMAT
S
PECIFICATION
Table 7-19. EEProm Data Message Format
Byte Contents Description
0
‘^’ ASCII ‘^’ (0x5E)
1 ‘E’ ASCII ‘E’ (0x45)
2 ‘E’ ASCII ‘E’ (0x45)
3 ‘ ‘ ASCII space (0x20)
4-5 dd In hex ASCII i.e. “1F”
6 , ACSII comma (0x2C)
7-10 dddd Data Value In hex ASCII i.e. “1F89”
11-12 dd Checksum of bytes 0 through 10. In hex ASCII i.e. “FA”
13 ‘\r’ ASCII carriage return (0x0D)