UPS Aviation Technologies Apollo SL70R, Руководство по установке

Страница: 12 / 52

General Information
Apollo SL70R Installation Manual
4
Warm-up ............................... none required
Receiver Frequency............... 1030 MHz
Sensitivity (MTL) ................. –72 dBm
Dynamic Range..................... > 50 dB
Side Lobe Suppression.......... 2 pulse (P1,P2)
Transmitter Frequency .......... 1090 MHz +/- 120 kHz
Transmitter Power................. 250 watts minimum, 325 watts typical
Reply rate .............................. 1200 / second
Mode A Capability................ 4096 codes plus SPI ident pulse
Mode C Capability ................ -1000 to 63,000 feet, 100 foot increments, from
either gray code or RS-232 serial inputs
1.8 R
EGULATORY
C
OMPLIANCE
The Apollo SL70R is designed and tested to meet the following TSO:
•
FAA TSO-C74c, Class A2
The SL70R complies with the FCC requirements specified in:
•
CFR 47, Part 87, Aviation Services, Subpart D, Technical Requirements
The SL70R software is designed and tested to RTCA/DO-178B, level C.
Note: Unauthorized changes or modifications to the SL70R may void the
compliance to regulatory agency requirements and authorization for
continued equipment usage
.
1.9 U
NPACKING THE
E
QUIPMENT
Carefully unpack the equipment. Visually inspect the package contents for any evidence
of shipping damage. Retain all shipping containers and packaging material in case re-
shipment is necessary.
1.10 P
ACKAGE
C
ONTENTS
As shipped from the UPS Aviation Technologies factory, the Apollo SL70R package in-
cludes most necessary items for installation other than supplies normally available at the
installation shop, such as wire and coax cable, the antenna, or any optional switches. The
items included in the package are listed in
Table 1-1.