6 Electrical installation
Warning!
Risk of electric shock if touching the components! The
unit operates with a 230 V AC voltage.
Warning!
Required electrical connections and installations,
commissioning and maintenance must only be performed
by an authorised person in accordance with local
standards and regulations.
Warning!
The Uponor system uses 50 Hz, 230 V AC power. In
case of emergency, immediately disconnect the power.
6.1 Connecting the heat interface
unit
Connect the heat interface unit as follows:
1.
Connect the power supply to Combi Port E in accordance with
the wiring diagram, see
2.
Pull the battery protection foil on the right hand side of the
heating station controller.
3.
Option: Connect the BUS, outdoor sensor and/or individual room
temperature controls.
4.
Connection and registration of actuators: please follow the
corresponding instructions for Uponor Smatrix Wave Pulse
respective Uponor Base flexiboard.
5.
Download the Combi Port E app, see
6.
Establish the equipotential bonding by using a copper
equipotential bonding conductor (cross-section of at least
6 mm²
)
7.
Connect the earthling clamp to a suitable equipotential bonding
rail in the building.
Combi Port E
|
Installation and operation manual
|
17
