Item
Description
A
In-wall cabinet
B
Frame
C
Door
1.
Close the heat interface unit with an insulation cover.
2.
Attach the frame to the cabinet body using wing nuts.
3.
Mount the door in the frame by fitting the two frame brackets into
the recesses in the door.
5.3 On-wall installation
Note
For disassembling the on-floor cabinet, leave
3 cm
space
above and to the sides.
The on-wall mounted cabinets are equipped with venting systems to
prevent unnecessary build-up of heat and condensation.
Install the on-wall cabinet
SI0000297
A
B
Item
Description
A
Plug (6 pcs)
B
Hexagon bolt (6 pcs)
1.
Mark the hole positions on the wall and drill holes using a
6 mm
drill.
2.
Insert the plug in the drilled holes.
Note
See the dimensional drawings for measurements. Pay
attention to the horizontal alignment.
3.
Attach the on-wall cabinet to the wall using the hexagon bolts.
4.
Connect all pipes to the on-wall rail connections following the
same process as for the in-wall cabinet.
Install the heat interface unit
SI0000298
C
A
B
Item
Description
A
Heat interface unit
B
Hexagon nut (4 pcs)
C
Fixed bolt (4 pcs)
1.
Screw the heat interface unit to the wall using the hexagon bolts
2.
Place the flat seals on to the connection rail
¾"
screw
connection.
SI0000299
A
Note
Check the flat seals for damage.
3.
Tighten the
¾"
swivel nuts.
14
|
Combi Port E
|
Installation and operation manual
