Install the room temperature control
Uponor Base flexiboard
CD0000350
A
B
C
D
A
Item
Description
A
Uponor Base flexiboard room controller including
screws
B
Bolt in wall cover
C
Nut
D
Mounting plate
1.
Attach the mounting plate to the bolts.
2.
Screw the nuts onto the bolts.
3.
Attach the flexiboard onto the mounting plate with the screws
provided.
Uponor Smatrix
CD0000351
B
E
D
C
A
Item
Description
A
Uponor Smatrix Wave Pulse room controller
B
DIN-rail
C
Nut
D
Bolts
E
Distance nut
1.
Fasten the distance nuts on the bolts.
2.
Fasten the DIN-rail with the screws on the distance nut.
3.
Attach the Uponor Smatrix room controller to the DIN-rail.
Additional information
Note
Visit the download centre for more information regarding
the configuration of Uponor Smatrix and Uponor Base
flexiboard.
Install the heating circuit (secondary)
Note
Please read the installation manual from the pump
manufacturer.
SI0000303
1.
Connect the circulation line to the heat interface unit.
2.
Connect the circulation pump to the power supply.
For information about the electrical connections, please see
"
Electrical installation, Page 17
If required, a return temperature limiter (RTB) or a differential
pressure regulator can be mounted.
SI0000306
A
B
Item
Description
A
Return temperature limiter (RTB)
B
Differential pressure regulator
1.
Remove the distance piece preferably by using two wrenches.
2.
Mount the return temperature limiter or differential pressure
regulator.
16
|
Combi Port E
|
Installation and operation manual
