UPM Elite THM701, Руководство пользователя, Страница: 36 / 40

The back cover should be mounted horizontally with the terminals on the top.
Thread the existing wiring through the big center hole from the back and set the back cover
horizontally on the wall.
Select two appropriate mounting holes and mark the locations with a pencil. If necessary, use a
level to make sure the thermostat is leveled.
Remove the back cover from the wall and drill two 3/16” holes in the marked screw positions.
Insert the wall anchors into the holes completely. If necessary, use a hammer to tap-in lightly.
Mount the back cover to the wall using the two screws. Make sure the metal terminals are on the top.
Attach the thermostat body to the back cover (that is already mounted on the wall) by
carefully aligning the two pieces and pressing firmly until they snap together.
33
Mounting the Back Cover of the Thermostat
LEVEL
Mark the
locations
with a pencil
Back cover