UPM Elite THM701, Руководство пользователя, Страница: 14 / 40

This function will maintain a constant temperature until the next program period starts.
If the system is in AUTO mode, only the currently active mode (heat or cool) setting will be changed.
On the MAIN tab press the UP / DOWN arrows beside the preset temperature to override the temperature.
(*The OVERRIDE tab will display to indicate the OVERRIDE function is active.)
(*The new temperature will then remain the same until the next program starts.)
To undo select CANCEL
Temporary OVERRIDE
1
11
2
4
If you wish to select a specific OVERRIDE OFF time (different than the start time of the next program
period) you may select the OVERRIDE UNTIL feature.
On the MAIN tab press the UP / DOWN arrows beside the preset temperature to change the temperature.
(The OVERRIDE tab will display)
Then select the OVERRIDE tab (UNTIL will display above the clock)
Set the OFF time with the CLOCK arrows.
(*The new temperature will now remain the same until the selected OFF time.)
To undo select CANCEL.
OVERRIDE UNTIL (Hour)
1
1
*
Note: When these features are activated the words OVERRIDE or UNTIL are displayed on the LCD.
Therefore it is not necessary to select OK to activate these features.
2
3