UPM Elite THM701, Руководство пользователя, Страница: 11 / 40

Select PROGRAM tab to display program settings.
- HEAT TEMP (displays heating temperature settings / adjust with up or down arrows)
- COOL TEMP (displays air conditioning temperature settings / adjust with up or down arrows)
- PROGRAM (touch the program area to sequence between program periods P1, P2, P3 or P4)
- CLOCK AREA (displays the time the program period will start )
Select any WEEKDAY to view its settings: (MON, TUE, WED, THU, FRI, SAT, SUN)
Select (P1=MORNING PERIOD) to set it’s program settings.
Adjust the HEAT / COOL / CLOCK (temperature and start time) settings with the UP / DOWN arrows.
REPEAT above steps to set the times and temperatures for P2 (DAY), P3 (EVENING) and P4 (NIGHT).
To accept settings select OK, to undo settings press select CANCEL. To continue to program the rest
of the week by each day press the PROGRAM tab again or select COPY and then weekday(s) to copy
the 4 program periods to the selected day(s).
2
1
3
4
5
6
8
Heating / Cooling Program
Note: After one day is programmed, you can copy all 4 of that day’s program settings to
any other day using the COPY program function. (see the Copy Function section)
Note: Heat and Cool temperature settings must be at least 3 degrees different.
Note: Select AUTO on system settings to ensure heating and cooling programs will run
automatically.