ChefTop™
3.2 LAYOUT OF THE CONTROL BOARD
1
2
4
3
3.3 POWER UP / POWER DOWN
When the power to the oven is supplied, the control board automatically turns on.
After 15 minutes if any button is not touched and there is no appliance in use (ovens, blast chillers, holding cabinet,prover) the
control board goes to stand by mode : only the led “START / STOP” is on.
To return the electronic control to full power again, simply push the
button
To have the electronic control on stand by, keep the
button pushed for 6 seconds while the control is on; to return it to
full power push the
button once more.
3.4 PROVER SELECTION
The selection of the appliance to control is made with the
button and the controlled appliance is shown by the display
panel 4.
To control the prover, select number 5 on the display panel 4.
3.5 MANUAL FUNCTIONING
Any holding program may be composed of 1 step.
The user can set the following settings:
time
chamber temperature
chamber humidity
To pass from one setting to another press the
button
TEMPO
TEMPERATURA
CAMERA
CLIMA
SELECT
CLIMA
LUX
Time Setting
The time is shown, in hours & minutes, on the display panel 1 and is set with the
buttons
When the display panel shows “
inF
”, the prover will work continuously until it is manually stopped by the user.
STEP 1
0h 00'
9h 59'
inF
•
•
•
ENGLISH
ENGLISH
4
3
ENGLISH
BakerTop™
