B. INSTRUCTION FOR THE
INSTALLER
1. WARNING
All the operations of installation, assembly, service and
assistance must be carried out by qualified personnel ac-
cording to current laws and regulations.
Please read carefully the instruction manual before the
installation and commissioning of the appliance.
The appliance must be unaltered (check for any transport
damage).
Remove all informative material from the chamber.
2. PRELIMINARY OPERATIONS
2.1 INSTALLATION SITE
Before placing the appliance, please verify the overall di-
mensions and the exact position of the electrical and wa-
ter connections and of the fumes exhaust as indicated on
the attached file “Technical Data”.
2.2 REMOVAL OF THE PROTECTIVE FILM
Carefully remove all the protective film from the external
walls of the appliance.
Pay attention not to leave any residue of glue. If there
should be any residue of glue, please remove it with an
appropriate solvent.
2.3 POSITIONING
Place the appliance respecting the safety standards indi-
cated below.
Place the appliance so that its back can be easily reached
in order to make the electrical connections and to pro-
vide the necessary service.
The appliance is not suitable for built-in installation or
side by side positioning.
ENGLISH
7
ENGLISH
Uno
R
6
ENGLISH
If the appliance is placed near walls, partitions, kitchen
cabinets, decorated edges, etc., it is recommended these
are made of non combustible material.
Otherwise, they must be coated with non combustible
thermal insulating material and the fire prevention stand-
ards must be respected.
Do not install the appliance near a fryer.
The prover has to be installed under a
BakerTop™
se-
ries oven.
Allow the four pins placed on the corners of the prover
top cover to locate in the holes of the four oven feet. (see
the picture here below).
Fix the prover to the oven by using the two L brackets
supplied (the brackets have to be fixed to the oven and
the prover with the self-threading screws supplied) (see
the picture here below).
