Unold 48040, Инструкция по эксплуатации

Страница: 30 / 120

30
will be vacuum packed in a gentle
process.
7. As soon as an optimal vacuum
packing result has been achieved,
the bag will be sealed. Likewise,
the indicator light of the „Seal“
button shows this accordingly.
8. The appliance starts with the
sealing process, the vacuum
pump is no longer working.
9. When the process is concluded,
both indicator lights go out.
10. If you want to interrupt the pro-
cess, press the „Stop“ button.
11. Then press the two „Release“ but-
tons simultaneously. The locking
mechanism is released and you
can remove the finished bag.
12. The vacuum packing process is
completed and the food in the
bag is vacuum packed.
13. If you only want to seal the bag,
but not vacuum pack, insert the
bag into the appliance as descri-
bed above. Then press the „Seal“
button. As soon as the indicator
light of this button goes out, the
bag is sealed and can be removed
as described.
14. Always check whether the vacuum
packing result meets your expec-
tations and ensure that the sealing
seam is complete and faultless.
The sealing gasket in the
vacuum packing chamber
becomes hot during operation
of the appliance. Consequently do
not touch the sealing gasket during
operation – danger of burn injury.
VACUUM PACKING WITH FILM
1. Prepare the appliance as descri-
bed in the section „Preparing the
appliance for operation“.
2. Ensure that sure that the seal in
the appliance is clean. If foreign
objects, such as crumbs are on
the seal, they must be removed,
otherwise a vacuum cannot be
generated.
3. Cut off the required amount of
film from the roll. Caution: Add at
least 7.5 cm for vacuum packing.
If you want to reuse this bag, you
must add even more: Allow 2.5
cm for each vacuum packing pro-
cess.
4. Insert an open end of the film into
the middle of the vacuum packing
chamber. Ensure that you leave
adequate space left and right (see
illustration).
5. Firmly press the two catches on
the right and left of the appliance
downward at the same time.
6. Press the „Seal“ button.
7. The appliance starts with the
sealing process, the vacuum
pump is no longer working.
8. When the process is concluded,
both indicator lights go out.
9. Then press the „Release“ but-
tons simultaneously. The locking
Copyright UNOLD AG | www.unold.de