Uniwell LX-5600 Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 130

Uniwell LX-5600 Скачать руководство пользователя страница 104

100

VI.

REPORTS

REPORT SEQUENCE

Control Key Position

Set the control key to

X, Z1 or Z2 position

and use the report sequence below;

- 1st level for daily report:

X (read only) position or Z1 (reset) position

- 2nd level for periodic report:

X (read only) position or Z2 (reset) position

For Z report issue and report format, there are some programming restrictions. Refer to system function flags
[SF-26~29] and the clerk security function flags.

Conventional Sequence (Direct Number Entry Method)

If you are familiar with the conventional report sequences which have been used by the conventional series, this
method is much faster than "Report Selection Method" to enter into the report sequence.

WARN MESSAGE# 03

01 A-FULL TRAN 1st

→

ISSUE-[ENT/TTL25]

X

X

Sequence with Usability of LCD Display (Report Selection Method)

In addition to the conventional sequence of the conventional series, now user friendly sequence is possible with
usability of LCD display as follows:

CLERK NAME 00001

CLERK NAME 00001

01 A-FULL TRAN 1st

REPORT

IRC REPORT

FLASH IRC REPORT

IRC STATUS CHECK

TIME & DATE

→

01 A-FULL TRAN 1st

02 A-FULL TRAN 2nd

03 FULL TRAN 1st

04 FULL TRAN 2nd

05 HOURLY 1st

06 HOURLY 2nd

→

ISSUE-[ENT/TTL25]

X

X

X

1.

Turn the control key to X position.

2.

Enter the clerk ID and press

CLERK ID

key.

3.

Select REPORT and press

ENTER

key.

4.

Select the report from the list by

ENTER

key.

If you know the report number, enter the report number and press

X2

key.

5.

Press

ENTER

or

TTL 25

to issue the report.

1.

Turn the control key to X position.

2.

Enter the report number, for example "1" for X-01
AUTO FULL TRANSACTION - 1st level report.

3.

Press

X2

key.

4.

Press

ENTER

or

TTL 25

to issue the report.

«
...
102
103
104
105
106
...
»

Содержание LX-5600



































































































































Отзывы:

Нет отзывов