Page 1
MRF-260 B
ASE
S
TATION
Introduction
The MRF-260 base station is an “addressable” base station. RF
Addressing gives you the ability to control as many as 60 identical
components throughout a house. To enable better range and reliabili-
ty the MRF-260 is equipped with the Narrow Band RF reception (like
the MRF-350), so is only compatible with other Narrow Band remotes.
1. MX/TX remote controls send
radio waves in every direction, so
your client enjoys “No More
Pointing” operation!
NOTE: The MRF-260 is ONLY compatible with Narrow Band remotes: the
current versions of the MX-3000, MX-950, MX-900, TX-1000, MX-850, MX-650
and the MX-350 remote controls. The MRF-260 is compatible with all MX-
950s, MX-900s and TX-1000s, but is NOT compatible with MX-850, MX-650
or MX-350 remote controls manufactured before November 1, 2006 or an
MX-3000 built before April, 2005. You can identify the build date of a remote
control by looking at the serial number. The first 6 digits indicate the build
date. If the serial number appears as 122905 014054, the first 6 digits indicate
that the remote was built on December 29, 2005.
2. The MRF-260’s integrated Narrow
Band RF receiver receives com-
mands from any Narrow Band
remote control.
3. The MRF-260’s built-in Front
Blaster sends commands to compo-
nents in the same cabinet space as
the MRF-260.
4. Self-adhesive “Flashers” affix to the
front panels of your client’s compo-
nents (over the built-in IR sensor).
The Flashers relay commands to
components out of sight of the MRF-
260’s Front Blaster. The flashers plug
in to the MRF-260’s rear flasher line
outputs via their 10 foot cables.
Uniquely, the MRF-260 can also con-
nect to rear panel IR Inputs via its
two adjustable Outputs.
