Universal Laser Systems Industrial ILS12.150D, Инструкция по установке и настройке

Страница: 29 / 36

Running Your First Job
29
Running Your First Job
We will now illustrate how to use your laser system to engrave on a piece of anodized aluminum from
start to finish. In this example, you will raster engrave a Test Card on a 2 x 3.5 inch (50.8 x 89 mm), 0.0195
inch (0.49 mm) thick piece of anodized aluminum.
Note: For this example we will be using CorelDRAW X3 and the CorelDRAW sample file provided on the
software CD. Install CorelDRAW, but do not start a new project.
Step 1 – Loading and Positioning the Material
Open the top door and position the piece of anodized aluminum (1) into the upper left corner of the
table, against the rulers.
Step 2 – Creating the Graphic
Using CorelDRAW, open the sample graphic file found on the software installation CD that came with
the ILS system. The file is named
ULSTest.cdr . The Software Installation CD contains test files in .cdr,
.eps, and .dxf.